Corel Photopaint .nib Blood Splatter Pack v2 Released!

Another day, another .nib brush pack ready to go… here is the updated version of the Blood Pack with 148 blood splatter brush nibs ready to gore up your graphics in Corel Photopaint!  This is the last of the old brush packs for Corel Photopaint in the .nib brush area of the site that I needed to update, and I will now start creating all new ones for you guys as I get time.  Like Smoke Pack v2, this pack was created and tested in Corel x5.

blog_bloodpackv2

Description: Second generation .nib set of blood splatter brushes generated from several blood ABR files. This is a standalone brushpack and does not contain the default Corel nibs. Click here to download Corel Photopaint .nib Blood Splatter Pack v2. Installation instructions are here.
Download size: 17.7MB
Created: 05-09-2013

Enjoy and please comment and share below!
Dan

Corel Photopaint .nib Smoke Brush Pack v2 Released!

Hi guys!  As promised, I am slowly replacing the old generation .nib brush packs for Corel Photopaint in the .nib brush area of the site and I figured we’d start with the super-popular smoke brushes.  I will be releasing the blood splatter pack very soon, so please stay tuned.  Please note this pack was created and tested in Corel x5.

blog_smokebrushesv2

Description: Second generation .nib set of smoke brushes generated from several smoke ABR files. This is a standalone brushpack and does not contain the default Corel nibs. Click here to download Corel Photopaint .nib Smoke Brush Pack v2. Installation instructions are here.
Download size: 5.2MB
Created: 05-08-2013

Enjoy and please comment and share below!
Dan

Reminder on how to install Corel Photopaint brush packs

Hey guys!  I’m getting a few emails from people not sure on how to install the Corel Photopaint brush packs I offer on the site (aka NIBs).  So just a reminder I wrote a tutorial on how to install them, which you can check out by clicking HERE!

Please let me know if you’re still having issues with this!

Dan

Converting a color photo to a scratchy black and white or sepia in Corel Photopaint!

Why hello there boys and girls, I hope everyone has been behaving themselves seeing as it’s been MONTHS since I’ve been able to sit down and throw together a tutorial for you. I apologize for the huge absence, but as most of you probably know, I have been going through some fairly massive life-changes so things have been a wee bit hectic. BUT I am happy to say that things are calming down and my work routine should be coming back to normal. With that said, here’s a small tutorial I wrote today based on a request from one of my Facebook friends asking about a photo I posted from my recent trip to Cuba.

If you’ve never been to Cuba or seen photos from other friends and whatnot, Cuba is basically frozen in time with LOADS of items such as cars, furniture, tools and much more from the 40s, 50s and 60s. In fact, you will see perhaps 4 cars from the 1950s for each car you see manufactured in the last 10 years or so… needless to say, this is heaven for a classic car lover like me! While walking around one of the markets, my girlfriend snapped a shot of me standing next to a 1955 Chevy and we both noticed that this pic could easily be an original black and white from the 50s. So, I promised her I would make it look like an old photo for our album and I posted it on FB for my friends to check out. Here’s how I did it in about 5 minutes.

Here’s the original photo we’re going to start with:

And here’s what we’re going to end up with at the end of the tutorial:

 

Before we get too far in to it, I’m going to assume you are now familiar working in Corel Photopaint. If you’re not sure how to use Objects and other basic functions, please check out my older tutorials, which cover the basics in greater detail.

Step 1 – First thing we need to do is create a duplicate layer of the photo… so just do a simple copy/paste and duplicate the layer.

Step 2 – Click on the new object layer and desaturate the layer… you do this by clicking on Adjust > Desaturate. Your photo will now appear in greyscale.

Step 3 – After running the desaturate function, the photo will be stripped of the depth the color gives it, making the photo appear a bit bland and lacking highlights and shadows. We’re going to punch this up a bit by playing with the contrast. In my older tutorials, I used to use the contrast/brightness/intensity function, but I have lately been using the more powerful Image Adjustment Lab, which you can access by clicking on Adjust > Image Adjustment Lab.

 

Step 4 – The Image Adjustment Lab allows you to controla variety of adjustments you can perform on the photo, including the saturation, overall brightness and contrast, as well as boost highlights, shadows and midtones. First thing I like to do is pump up the contrast, then I adjust the highlights and midtones to a level that appeals to me. You can see the adjustments I made below:

 

Once you’re happy with the look of your photo, click OK to apply the changes and return to the main edito screen.

Step 5 – Before we merge the object layer with the background layer, there’s one more little trick I like to do, and that’s add just a pinch of color to the photo… you want just a little smidge though, something barely noticeable. You do this easily by simply reducing the opacity by a fraction on the main object layer. I dial it down to 92% for the level I like:

 

At this point, we no longer need to keep the layers seperate, so go ahead and merge them and we’ll move on to the next step.

Step 6 – Time to mess up our photo and give it some age. I quickly did an image search for scratched photo textures and found this beauty by Jeremy Brotherton on his Deviant Art page (click here).  Just paste this right on top of the photo.

Step 7 – After you’ve slapped a texture on top of your photo, set the object layer type to “multiply” and you’ll start to see the magic happening! Of course we’ll need to adjust the texture a bit, so let’s tweak it to where we want it to be…

I want to pump up the highlights of the texture so it doesn’t darken the photo up too much. We can do this easily by pumping the contrast up to the max:

The texture will still be a little too intense, so I tone that down by reducing the opacity to 40% or so. The texture looks good, but it’s not quite scratchy enough for me, so we’ll build that effect up a bit more.

Step 8 – I want more scratches in the photo, so paste another layer of the texture and set that layer to “If Darker” and reduce opacity to 30ish% and the scratches should now look pretty convincing and realistic.

Step 9 – One more step… the photo looks great, but it’s a little too clear for an old photo. We can dirty up slightly by adding a tiny bit of noise. Hit the noise filter by clicking on Effects > Noise > Add Noise.

And we’re done! Here’s our final result straight out of the 50s and ready for your album:

Would you prefer Sepia? Adding a Sepia effect to this end result is one step away, and VERY easy. Just click on Adjust > Color Balance and tweak the yellow and magenta sliders like so:

You can also drop the photo in to a Polaroid template (There are dozens of these available on Deviant Art):

Thanks for reading, please make sure to share this tutorial or comment using the tools below!
Dan

The Color Transparency Tool in Corel Photopaint – Delete specific colors in a single click!

I would like to start introducing you guys to some of the less-used tools in Photopaint, which can be huge time savers if you know how to use them and what they do.  Today I am going to write about the Color Transparency Tool, which is a VERY fast replacement to the tedious chore of using the magic wand tool to isolate specific areas of color to delete them.  You see, with the magic wand tool, you have to click each area of color you want to delete if they are not all connected.  So, let’s pretend you have an image with a black background with a blue line going across it.  To delete the black, you would take your magic wand tool, click on both sides of the image where the black is to mask it, then hit delete.  Now this is very simplified, but imagine a much more complicated scenario.  Well, with the Color Transparency Tool, all you would have to do is click on any area that is black, and *POOF* all the black area in the photo will be removed, all with a single click.

So, let me show you how this works…

Step 1 – First, we need a photo or something we want to edit.  I did a Google search for random images and decided on this cute photo of a Panda cub and his mother:

The Color Transparency Tool only works on objects, so you first need to convert this photo to an object.  You can do so by clicking on Object > Create > From Background and this will turn the photo background in to an object within the object docker.

Step 2 – We’re ready to start 🙂  Just go ahead and click on the Color Transparency Tool or just hit 2 on your keyboard to activate the tool:

You can use the properties bar to see the additional options that come with this tool… you can use these settings to modify how the tool behaves when applied to your image.

The first setting I want to show you and the one you will play with the most is the Tolerance setting.  The lowest tolerance (0) will select only the exact color you clicked on.  The more you increase the tolerance, the greater the range of hues of your base color will be selected.  Let’s go with 0 Tolerance and you will see how it works:

Step 3 – Go ahead and click on a color in the image… I selected this image because I wanted to delete the black colors and replace them with something outlandish!  So, lets click on the black and you will see that only the areas that are the exact color I picked will be removed.

Step 4 – This time, I want to select all the dark black areas in the photo, so I will increase the Tolerance to 8:

And here is the result… notice all black areas throughout the photo are gone just by clicking in one spot:

Step 5 – Now I’m going to show you how you can use this tool to create some interesting effects… bear (no pun intended) in mind that the color is transparent, so you can easily create some fun effects by placing objects under this layer.  As a crude example, I’ll pop a rectangle object under the picture to show you what happens.  First, let’s draw a rectangle the size of our canvas:

Then be sure to place the rectangle object UNDER the photo object in the object docker:

And here’s what you end up with:

And that’s it!  So here you have a quick and easy way to delete specific colors to varying degrees throughout a photo or image all with one click.  Nice little time saver eh?

Thanks and please comment!
Dan